November 2, 2026·12 min read

Cabinet Design Software with CNC Output: G-Code vs. DXF vs. Proprietary Formats

Cabinet Design Software with CNC Output: G-Code vs. DXF vs. Proprietary Formats

Every cabinet software vendor will tell you their product has CNC output. What they rarely tell you is that "CNC output" covers a wide range of things—some of which will send files straight to your Shapeoko or Avid, and some of which will drop a DXF on your desktop and leave the rest of the work to you. If you're shopping for cabinet design software with CNC output, the single most important thing you can do is understand what format you're actually getting before you pay for anything.

This guide explains the formats, who needs what, and the questions that will filter out software that looks right in a YouTube demo but stalls your shop the day you actually use it.


What Does "CNC Output" Actually Mean?

Your machine doesn't run DXF files—it runs G-code (or a dialect of it). The software either generates that code directly, or it exports to a CAM tool that does. That's the crux of it. When a cabinet program says it has CNC output, it might mean any of the following:

1. True G-code output — The software generates a finished toolpath file your controller can run, usually through a post processor matched to your machine. You load it, hit go.

2. DXF export — DXF is geometry your CAM program still has to turn into toolpaths. It is a drawing file format, not a machine instruction file. You still need a CAM step—VCarve, Fusion 360, or similar—before anything moves on your router.

3. Proprietary format — Some tools output to a format that only works with a specific machine brand or controller. Because it is proprietary to Thermwood machines, there are no post processors required in tools like eCabinet Systems—but that coin flips: if you don't own that machine, the output is useless to you.

None of these is universally better. It depends on your workflow. But you need to know which one you're getting.


G-Code vs. DXF: The Practical Difference in the Shop

If you've been cutting parts for a while, you already know the CAM step takes time. For a single part, it's maybe five minutes. For a full kitchen's worth of nested panels with dados, rabbets, and hardware holes, it can be an hour or more—every job.

The router needs G-code, generated by CAM software from a cut list plus part geometry, typically as DXF or nested sheet files. Software that produces G-code directly handles that CAM step internally. Software that produces DXF hands the problem back to you.

The right choice depends on what you already have:

  • If you have VCarve Pro or Aspire and you know it well, DXF export from a cabinet program may be perfectly fine. You import the sheet, define your toolpaths once per operation type, and run it. It's a two-tool stack, but it's a workable one.
  • If you want to eliminate that step entirely—click a button, get a file, cut—you need a tool that generates G-code natively through a post processor matched to your machine.

The risk with DXF-only tools is scope creep in the CAM step. Every time a cabinet dimension changes, you're back in VCarve regenerating toolpaths. On custom work where every job is different, that overhead adds up.


The Post Processor: What It Is and Why It Matters

A CNC post processor is software that converts CAM toolpaths into the machine-specific program required by a CNC controller. Even within "G-code," there are dialects. A Shapeoko running GRBL expects different formatting than a ShopBot running its own controller, which is different again from a Mach3-based machine. Just about every machine has a different G-code formatting, so writing code to different machines from the same file requires post processors to format the code correctly.

When you're evaluating cabinet design software with CNC output, you need to know two things about post processors:

  1. Does the software ship with a post for your machine? Some vendors support hundreds of machines. Mozaik CNC offers true-shape nesting, CNC MDF Doors, CNC Dovetail Drawers, and more, with free stock post processors for over 175 different CNC machine brands. Others have a handful of posts, usually weighted toward industrial equipment.

  2. What happens if your machine isn't on the list? Mozaik provides the first hour of custom post integration at no charge; additional post work is billed at $95/hour. That's a reasonable answer. Other vendors charge flat fees ranging from a few hundred dollars upward, or don't offer custom posts at all.

Always test with an actual file on your actual machine before you commit to a subscription or purchase. A demo video will not reveal post processor problems.


Proprietary Formats: The Lock-In Risk

Some cabinet software, particularly tools built by CNC machine manufacturers, outputs a format that only runs on their hardware. eCabinets interfaces only with Thermwood. That's fine if you own a Thermwood and plan to keep it. It's a problem if you ever want to switch machines, or if you bought the software before buying the machine.

Separately from machine-specific formats, watch out for proprietary job formats. Some tools store your designs in a binary format that only opens in that software. If the vendor raises prices, discontinues the product, or gets acquired, your job files may be inaccessible without ongoing subscription payments. Ask specifically: "Can I export my cabinet designs to a standard format like DXF or STEP?"


The Main Tools, Honestly Compared

Here are the most commonly used options in small-shop cabinet workflows, with what their CNC output actually looks like.

Mozaik CNC

Mozaik ships in two main product lines. Mozaik Manufacturing targets shops without a CNC router and covers design, 3D rendering, cut lists, hardware lists, the optimizer and pricing reports. Mozaik CNC adds nesting, G-code generation and post processors on top. It's the most frequently recommended purpose-built option for shops that want design-to-G-code in a single tool.

Mozaik CNC costs $225 per month, with a 3-month paid trial first, or save 10% with an annual plan. Extra seats are $60 per month. A three-station shop on Mozaik CNC is $345 a month, not $225—worth knowing before you budget.

The limitations: it's Windows-only, the real cost of adopting Mozaik is a Windows workstation plus a Windows tablet per bench, on top of a subscription that already auto-renews annually. And like all subscription tools, you're renting access, not buying it.

Cabinet Vision

Cabinet Vision's real power comes from pairing it with S2M Center—Screen-To-Machine. Cabinet Vision is built for large-scale manufacturing with full CAM integration and direct CNC machine code output. It's the industry benchmark for high-volume shops, but pricing is quote-based and typically starts well above what most small shops are prepared to spend.

PolyBoard

PolyBoard is Windows-based parametric custom cabinet design software built for made-to-measure work. Output includes cut lists, 2D part plans with machining details, and DXF through a post processor the vendor calls compatible with virtually all CNC software. The perpetual license runs roughly $1,995–$2,345 depending on edition, but PolyBoard's demo holds back manufacturing output until you pay. Test the output pipeline before you buy.

KCD Software

KCD Software also exports CNC G-code and DXF output, and it's a common choice for smaller North American shops that want a straightforward design-to-cut workflow. Pricing is mid-range and not subscription-based, which some shops prefer for cash flow predictability.

SketchList 3D

SketchList 3D exports DXF files that import directly into CNC routers, alongside detailed cut lists and shop drawings. It's well-regarded for cut list accuracy and visualization, but it's a DXF-out tool—SketchList 3D supports DXF export for shops that use a separate CAM step between design and cutting. That's not a knock; it's just the workflow you're signing up for.

Cabinet Planner

A one-time $69.95, with the developer stating there are no other fees, gets you a full cabinet design program covering face frame and frameless boxes, shop plans, elevation and floor plan views, 3D renderings, and a panel optimizer with DXF output for your CNC. If you already have VCarve and you're looking for something to build cut lists and nesting layouts cheaply, this covers the design side without subscription overhead.

CabinetPartsPro

CabinetPartsPro helps automate cabinet part creation, nesting, DXF output, and CNC-ready cutting code without making the workflow feel complicated. The Lite + Vectric tier is aimed at smaller shops that want Vectric-based toolpath capability, which makes it a reasonable choice if you're already invested in the Vectric ecosystem.


Six Questions to Ask Before You Buy

These questions will surface the issues that demos hide.

1. Does it output G-code, DXF, or something else? Get a specific answer. "CNC integration" is marketing language; G-code output is a technical fact.

2. Is there a post processor for my exact machine model? Not just the brand—the controller version matters too. Ask for the post file and test it.

3. Does the post processor handle all the operations I need? Profiling is easy. Hardware boring, dados, and second-side operations are where posts break down. Test a file with all of them.

4. What happens to my files if I cancel? Can you export to a standard format? If your jobs are locked in a proprietary binary, you're renting your own data.

5. Is it Windows-only? Most cabinet software is. If your shop runs Macs or you want browser access, your choices narrow fast.

6. What does the full-production workflow actually cost? Most CNC integration problems surface at the post, not at the nest, and a demo file will not reveal them. Ask for a trial on a real kitchen job, not a sample file.


One Workflow Worth Knowing: The Two-Tool Stack

Not every shop needs a single integrated tool. A single integrated tool—design, cut list, nesting, and G-code all in one—has obvious appeal. But plenty of small shops run design software that outputs DXF, then use a CAM tool like VCarve Pro or EdgeWright to handle toolpaths and post processing. This approach keeps costs lower on the design side and lets you use a CAM tool you already know and trust.

The tradeoff is the extra step—every time parts change, you're back in the CAM tool. If your work is highly repetitive (32mm system, standard box sizes), the round-trip is fast. If every job is fully custom, it can eat real time.


The Bottom Line

The phrase "cabinet design software with CNC output" is doing a lot of work. At one end, it means a tool that writes machine-ready G-code for your specific router with a post processor, handles nesting, bores hardware holes, and manages second-side operations. At the other end, it means a DXF export button.

Both can work. What matters is being honest about which one you're buying, what the ongoing cost looks like for your seat count, and whether the post processor will actually talk to your machine before you've spent money on training and setup.

If you run a Shapeoko, Onefinity, Avid, or any other router with a standard G-code controller, you have real options in every price range. Test with a real job file—full kitchen, actual dimensions, all the machining operations—before you commit.


If your workflow involves importing DXF or nested sheet files into a CAM tool for toolpath generation, EdgeWright is worth a look—it's built specifically for CNC router operators and runs entirely in the browser. Try it free at app.edgewright.ai.


FAQ

Can cabinet design software output G-code directly, or do I always need a separate CAM program?

Some cabinet software—Mozaik CNC, Cabinet Vision with S2M Center, Cabinet Pro CNC—generates G-code directly through built-in post processors. Others, like SketchList 3D and PolyBoard's base editions, export DXF and require a separate CAM step. Which approach you need depends on how much manual CAM work you want to do per job.

What is a post processor in cabinet software, and why does it matter?

A post processor is the translation layer between a software's toolpath data and the specific G-code dialect your CNC controller expects. Even if two machines both "run G-code," a Shapeoko and a ShopBot format that code differently. Without a matching post processor, the output file either won't run or will run incorrectly. Always verify that the software ships with a post for your exact machine model—not just your brand.

Is DXF output from cabinet software good enough for a CNC router?

It depends on your existing setup. DXF is a geometry file, not a toolpath file. Your CNC controller cannot run DXF directly. If you already own VCarve Pro, Aspire, or a similar CAM tool and you're comfortable building toolpaths there, DXF export from a cabinet program is a workable solution. If you want to go from cabinet design to machine file in one click, you need software that outputs G-code natively.

What cabinet software works with a Shapeoko, Onefinity, or other hobbyist CNC router?

Most standard G-code-based routers can accept output from any software that includes a matching post processor, or that outputs standard GRBL-compatible G-code. Mozaik CNC lists over 175 machine brands in its post library. PolyBoard's DXF output uses layer naming conventions that VCarve and Aspire read natively. Cabinet Planner and SketchList 3D output DXF that can be imported into most CAM tools. Test with your specific machine before committing.

How much does cabinet software with CNC output cost?

It ranges widely. Cabinet Planner is a one-time $69.95 for DXF export. Mozaik CNC is $225/month per seat. PolyBoard's Pro editions with manufacturing output run roughly $1,995–$2,345 for a perpetual license. Cabinet Vision is quote-based and typically costs significantly more. The right budget depends on your production volume—a high-throughput shop that runs a router daily can absorb a $200/month subscription; a part-time hobbyist probably cannot.

Ready to try EdgeWright?

AI-powered CAM software for CNC routers — free to start.

Launch App →